Products for Corrosion Protection

  • SikaTop® Armatec® 110 EpoCem®

    SikaTop®-Armatec 110 EpoCem® is cement-based epoxy-modified three-component anti corrosive coating and bonding slurry.

     

    Usage

    SikaTop®-Armatec 110 EpoCem® is anti-corrosion coating for reinforcement steel:

    • For repairs to reinforced concrete where there is corrosion of the underlying reinforcement steel
    • For the preventive protection of reinforcement steel in thin reinforced concrete sections
    • As bonding slurry for use on concrete, mortar or steel
    • For repairs to concrete using SikaTop® patching and repair mortars
    • For bonding of new and old concrete.

    Characteristics

    • Excellent adhesion to steel and concrete
    • Acts as an effective barrier against penetration of water and chlorides
    • Contains corrosion inhibitors
    • Provides an excellent bonding coat for subsequent application of repair mortars cement and epoxy based
    • Pre measured, ready-to-use packs
    • May be spray-applied
    • Frost- and de-icing salt resistant
    • Non-flammable

    Color

    • Part A: white liquid
    • Part B: translucent yellowish liquid
    • Part C: cement grey powder
    • Mixed product: grey

    Packaging

    • Pre-dosed packs (A+B) 6.75 kg sets.
    • Part A:0.50 kg plastic container
    • Part B:1.25 kg bag
    • Part C:5.00 kg bag
  • SikaTop® Armatec® -108

    SikaTop Armatec®-108 is cement based, polymer modified 2 component coating for corrosion protection.

     

    Usage

    SikaTop Armatec®-108 is used for:

    • On rebar for protection from corrosion.
    • Repair of damage reinforced concrete with corroded reinforcing bars resulting from carbonation.
    • Against the action of Calcium Chlorides and de-icing salts
    • Preventive protection of reinforcing bars in slim reinforced concrete sections and filigree constructions.

    Characteristics

    • Easy to use
    • Excellent adhesion to steel
    • Good bonding coat for subsequent cement and epoxy-based repair mortar
    • Good barrier effect against water, chlorides and CO2
    • Contains corrosion inhibitorsNon-inflammable

    Color

    • Part A : white liquid
    • Part B : cement grey powder
    • Part (A+B) : greyish green

    Packaging

    • Pre-dosed packs (A+B) 5 kg sets.
    • Part A:1.00 kg plastic container
    • Part B:4.00 kg bag
  • Sika® Rustop

    Sika® Rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement.

     

    Usage

    • Protects new or old reinforcement steel in construction from corrosion
    • Ideal for protecting reinforcements with insufficient cover or in thin sections
    • Protects embedded steel in repairable structures from further corrosion after rehabilitation
    • Protects concrete against the action of Calcium Chlorides and de-icing salts

    Characteristics

    • Impervious anticorrosive coating to prevent ingress of water, chlorides and carbon dioxide
    • Excellent adhesion to steel, concrete and mortar
    • Good bonding for subsequent concrete or mortars due to cementitious base
    • Contains corrosion inhibitors
    • For structures under repair or rehabilitation the corroded surfaces rust must be cleaned t using Sika® Rustoff 100
    • Easy to use

    Color

    • Comp A : White free flow lump free liquid
    • Comp B : Green free flow powder

    Packaging

    1.25kg system, 2.50 kg system

    Downloads

    Sika® Rustop
  • SikaTop® Armatec® -108 PC

    SikaTop Armatec®-108 PC is cement based, polymer modified 2-component coating for corrosion protection of steel and metal.

     

    Usage

    SikaTop Armatec®-108 PC is used for:

    • Protection of metal structure from corrosion.
    • Repair of damage reinforced concrete with corroded
    • reinforcing bars resulting from carbonation.
    • Against the action of Calcium Chlorides and de-icing salts.
    • Preventive protection of reinforcing bars in slim reinforced
    • concrete sections and filigree constructions.

    Characteristics

    • Easy to use
    • Excellent adhesion to steel
    • Good bonding coat for subsequent cement and epoxy-based repair mortar
    • Good barrier effect against water, chlorides and CO2
    • Contains corrosion inhibitors
    • Non-inflammable

    Color

    • Part A : white liquid
    • Part B : cement grey powder
    • Part (A+B) : greyish green

    Packaging

    • Pre-dosed non-returnable packs (A+B) in units of 3 kg.
    • Part A:1.00 kg plastic container
    • Part B:2.00 kg bag
  • Sika® Rustoff 100

    Sika® Rustoff 100 is a single component liquid that removes rust and prevents further rusting of steel structures by providing a passivating coat.

     

    Usage

    Sika® Rustoff 100 removes rust and prevents further rusting of:

    • New or old reinforcement steel in construction
    • Embedded steel in repairable structures
    • Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
    • Ball bearings, valves, tools etc.
    • Ideal for protecting reinforcements with insufficient cover or in thin sections

    Characteristics

    • Removes rust
    • Prevents further rusting by providing a passivating coat
    • To be applied with brush, cotton waste swab or spray gun on the affected metal surface
    • Easy to apply since it is in liquid form
    • For repairable structures when applied with brush /spray gun can reach even the most difficult rusted areas with congested reinforcements

    Color

    Clear liquid

    Packaging

    250g, 500g, 1kg, 5kg, 20kg

  • Friazinc® R

    Two component, low solvent, zinc rich epoxy resin based primer for steel.

     

    Usage

    • Used as protective coating or as primer
    • Specially suitable for objects which are subjected to mechanical wear, e.g, weirs,interior of pressure pipe line, gates, steel liner of penstocks and tanks etc.

    Characteristics

    • Easy to apply
    • Fast application
    • High mechanical properties
    • Good adhesion to substrate
    • Fast curing
    • Resistance to weathering

    Color

    • Part A: grey liquid
    • Part B: light brown liquid

    Packaging

    • Part A:1.88 kg x 2 containers
    • Part B:0.12 kg x 2 containers
    • Part A+B:2.00 kg x 2 ready to use units

    Downloads

    Friazinc® R
  • Icosit® K-25 (I)

    Icosit® K-25 (I) is two part, coloured all purpose epoxy resin based protective coating.

     

    Usage

    • For use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika® EpoCem®), steel, stones, wood etc.
    • As an anti-corrosion coating in food and beverage processing plants, sewage works, agricultural, chemical and pharmaceutical plants, bottling plants etc.

    Characteristics

    • Corrosion resistance
    • Protect cementitious structures against weathering
    • Resistant to oil and grease
    • Weather-proof
    • Mild dew-resistant
    • Good chemical resistance
    • Resistance to carbonation attack
    • Thixotropic, no runs on vertical surface
    • Easy to apply

    Color

    • Resin - Part A: coloured liquid
    • Hardener - Part B: light yellow liquid
    • Available colour shades: ~RAL1002 (Sand yellow), 1013 (Oyster white), 1014 (Ivory), 2009 (Traffic orange), 6034 (Pastel turquoise) , 7001 (Silver grey), 7034 (Yellow grey), 7035 (Light grey), 7038 (Agate grey), 8001 (Ochre brown), 9001 (Cream), 9003 (Signal white)

    Packaging

    • Part A: 3.2 kg x 2 containers
    • Part B: 0.8 kg x 2 containers
    • Part A+B: 4.0 kg x 2 ready to use units
  • Icosit® K-25 (I)/3

    Icosit® K-25 (I)/3 is two part, coloured all purpose epoxy resin based protective coating.

     

    Usage

    • For use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika® EpoCem®), steel, stones, wood etc.
    • As an anti-corrosion coating in food and beverage processing plants, sewage works, agricultural, chemical and pharmaceutical plants, bottling plants etc.

    Characteristics

    • Corrosion resistance
    • Protect cementitious structures against weathering
    • Resistant to oil and grease
    • Weather-proof
    • Mild dew-resistant
    • Good chemical resistance
    • Resistance to carbonation attack
    • Thixotropic, no runs on vertical surface
    • Easy to apply

    Color

    • Resin - Part A: coloured paste
    • Hardener - Part B: brown coloured liquid
    • Available colour shades: ~RAL 7009 (Green grey) and 8004 (Copper brown)

    Packaging

    • Resin - Part A: coloured paste
    • Hardener - Part B: brown coloured liquid
    • Available colour shades: ~RAL 7009 (Green grey) and 8004 (Copper brown)
  • Inertol Poxitar®

    2-component reaction hardening coating of low solvent content based on a coal tar epoxy combination with mineral fillers.

     

    Usage

    Protective coat for concrete and steel, as internal and external coating for buried and submerged structures e.g. sewage systems, chemical industries, harbour facilities etc. Also suitable where application on to damp concrete is inevitable.(The marked line should be removed) Not suitable for surfaces in contact with drinking water.

    Characteristics

    • Tough hard, heavy duty
    • Abrasion and impact resistant
    • Excellent resistance to water and chemicals
    • Resistant to microbes

    Color

    • Part A: light yellow liquid
    • Part B: black liquid
    • Part A+B: black liquid

    Packaging

    • Part A: light yellow liquid
    • Part B: black liquid
    • Part A+B: black liquid