Sikagard®-551 S Elastic Primer

Solvent based polymer binder

12 months from date of production

Store properly in original and unopened, sealed and undamaged packaging, in dry conditions at temperatures between +5 °C and +35 °C. Protect from direct sun light and frost.

1 × Sikagard®-551 S Elastic Primer

The material is supplied ready for use. Stir thoroughly prior to application.

+8 °C min. / +40 °C max.

< 80 %

Substrate and ambient temperature must be at least 3 °C above dew point.

+8 °C min. / +40 °C max.

Waiting time before coating:

Note: When application is on existing coating, waiting time prior to overcoat the primer will increase by 100 %.

Both water dispersed and solvent containing coating system can be used as subsequent topping.

0.10–0.15 kg/m² dependent on the absorbency of the substrate

Sikagard®-551 S Elastic Primer is supplied ready for use. Stir thoroughly prior to application.

Sikagard®-551 S Elastic Primer can be applied by brush, roller or airless spray.

With very dense substrate up to 10 % Sika® Thinner C may be added to Sikagard®-551 S Elastic Primer to increase penetration.

Sikagard®-551 S Elastic Primer does not require any special curing but must be protected from rain for at least 6 hours at +20 °C.

Clean all tools and application equipment with Sika® Thinner C immediately after use. Hardened / cured material can only be removed mechanically.