Product Data Sheet Show all documents

Sika® Wall Décor Coarse

Ready to use water resistant white cement based coarse putty for indoor and outdoor applications.

Sika® Wall Décor Coarse is a water resistant white cement based coarse putty specially formulated to be used as base coat on plastered surfaces.

  • Excellent white look
  • Excellent water resistant capability
  • Reduce Paint Consumption
  • Never peels off
  • No flaking
  • No Blistering
  • No Chalking
  • Good breathability
  • Superb Bonding- White Cement base provides great adhesion to walls
  • Better Coverage
  • Can be applied on moist surface
  • Excellent workability & ease of application
Product Data Sheet Show all documents

Usage

  • Levelling layer to cover up undulations before application of Sika® Wall Decor.
  • White cement based material for indoor and outdoor surfaces
  • Direct application on RCC/ Plastered surface
  • Levelling layer for removal of roughness or undulation on wall plaster.
 

Advantages

  • Excellent white look
  • Excellent water resistant capability
  • Reduce Paint Consumption
  • Never peels off
  • No flaking
  • No Blistering
  • No Chalking
  • Good breathability
  • Superb Bonding- White Cement base provides great adhesion to walls
  • Better Coverage
  • Can be applied on moist surface
  • Excellent workability & ease of application

Packaging

30 kg bag

Colour

White lump free powder

Product Details

Product Information

Shelf Life

8 months from date of production

Storage Conditions

8 months from date of production if stored properly in unopened original packaging. Protect from frost.
Technical Information

Tensile Adhesion Strength

≥0.80 N/mm2  at 28 days                           (According to EN 1348)

Application

Application Information

Pot Life

~70-100minutes

Drying Time

Initial setting time

240-300 minutes

According to IS-4031 (Part 5)

Final setting time

300-600 minutes

Consumption

Consumption

~1.2 kg powder / m2 / mm thickness.

Sika® Wall Décor Coarse putty covers an approx 18-22 sft / kg /mm in 2 coats on smooth finish substrate in optimum conditions.
Application steps

APPLICATION

First mix the supplied Sika ® Wall Décor Coarse Putty with 20 to 25% clean water & continue mixing until a homogeneous lump free paste of desired consistency is obtained.

Apply 1st coat of Sika® Wall Décor Coarse Putty uniformly on already moistened surface with the help of putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying & hardening of the 1st coat it should be prepared with fine waterproof emery paper before apply 2nd coat with Sika® Wall Décor Coarse putty / Sika® Wall Decor. The total maximum thickness of 2 coats using Sika ® Wall Décor Coarse putty shall not be more than 15 mm.

Uneven thickness due to unskilled application may cause problem. Finishing should be done by skilled POP applicators.

CLEANING OF TOOLS

Clean all tools and application equipment with normal water immediately after use.

Documents