Product Data Sheet Show all documents

Sika® Antisol® A-4

Water dispersed, acrylic copolymer based concrete curing compound

Sika® Antisol® A-4 a water dispersed acrylic copolymer based curing compound. It is ready to use and simple to apply. Sika® Antisol® A-4 will form a thin film, covering the surface of the concrete to prevent premature water loss due to evaporation.

Sika® Antisol® A-4 provides the following beneficial properties to the concrete surfaces:
  • Reduces incidence of plastic cracking
  • Reduces shrinkage
  • Reduces surface dusting
  • Eliminates expensive methods of curing such as hessian-watering, etc.
Product Data Sheet Show all documents

Usage

Sika® Antisol® A-4 is sprayed on to newly laid concrete surfaces to form a thin film barrier against premature water loss, without disturbing the normal setting action. Sika® Antisol® A-4 is suitable where subsequent surface treatment with acrylic paints and polymer modified mortar or plaster etc. are required.  

Advantages

Sika® Antisol® A-4 provides the following beneficial properties to the concrete surfaces:
  • Reduces incidence of plastic cracking
  • Reduces shrinkage
  • Reduces surface dusting
  • Eliminates expensive methods of curing such as hessian-watering, etc.

Packaging

230kg

Colour

Milky white liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

ASTM C309, Type I, Class B
Product Information

Chemical Base

Water-dispersed, acrylic copolymer

Shelf Life

6 months from date of production if stored properly in unopened original packaging.

Storage Conditions

Store in dry condition at temperatures +10 to +40°C. Protect from frost and direct sun light.

Density

~ 1.01 kg/l @ 25°C

 

Application

Consumption

Consumption

5 to 6.5 m2 per liter depending on wind, humidity and temperature condition. Actual dosage to be finalised on the basis of site trials.
Application steps

APPLICATION

Spray application on newly laid concrete as soon as surface water evaporates. Roller and brush can be used for hardedened concrete.

For vertical surfaces, apply immediately after removal of formwork.

After application, the area must be protected from rain for at least 2-3 hours.

Documents