Marco Poltera
Corporate Product Engineer
The Sika AnchorFix® calculation software is a free, web-based design tool for the calculation of chemical anchors and post-installed rebar connections.
Developed for engineers, planners, and specifiers, it supports anchor design according to European and North American standards, ensuring reliable, code-compliant solutions.
Access the Sika AnchorFix® Calculation Software
Application of the Software
This software application and the results derived from its utilization are intended only for use by professional users with expert knowledge in the area of the intended application. Users must independently verify the results before any use and take into account the site and application conditions, product data sheet and product literature, technical state of the art as well as local applicable standards and regulations.
With respect to the software application and results derived from its use, Sika makes no warranties of accuracy, reliability, completeness, merchantability or fitness for any purpose. The software application is provided on an "as-is" basis and Sika expressly disclaims any warranties with respect to the software application and results derived from its use.
Sika shall not be liable for any consequential, punitive, incidental, exemplary, or special damages (including but not limited to loss of business opportunity or loss of profit) arising out of the evaluation or use of the software application and results derived from its use.
Product Properties
The information and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product's suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Copyright
Except as indicated otherwise, all information, text, graphic images, features, functions, and layout contained in this software are the exclusive property of Sika and may not be copied or distributed, in whole or in part, without the Company's express written consent.
GDPR
By transmitting information to Sika, you grant to the Company the unrestricted irrevocable license to use, reproduce, display, modify, distribute and perform such information. Personal identity information is used by Sika only to process a request for information by you or for marketing our products and services.
Learn more about general data protection regulations.
©Copyright Sika Services AG 2016
What the Sika AnchorFix® Software Can Do
The Sika AnchorFix® software helps you design threaded rod anchors and post-installed rebar connections using the latest design concepts and approvals.
- Complies with EC2-4, EAD 330499-02-0601, ACI 318 Chapter 17, and CSA standards
- Considers 100-year design life and sustained loading
- Two dedicated modules:
-Anchor calculation module for threaded rods and rebar
-Rebar connection module for post-installed reinforcing bars - Custom anchor layout and baseplate design with drag-and-drop adjustment
- 3D visualization of all user inputs for a clear, interactive overview
- Detailed design report following EC2-4 and ACI 318 steps
- Improved user filters for faster, more accurate product selection
Advanced Design & Calculation Features
Modern, User-Friendly Interface
Designed with engineers in mind, Sika AnchorFix® provides a smooth, efficient design experience.
- Available in 10 languages
- Metric and Imperial units supported
- Intuitive design inputs and layout
- Professional report output for documentation and approvals
- Real-time calculations and graphical feedback
Cloud-Based and Always Up to Date
No installation, no manual updates — just open, log in, and start designing.
- Free, cloud-based software – no administration rights needed
- Compatible with major web browsers and tablets
- Automatic updates ensure access to the latest versions
- Integrated product approvals (ETA and ICC-ES)
- Full user control over the entire design process
Visualize Your Design in 3D
Sika AnchorFix® software provides engineers with dynamic 3D visualization tools to review anchor and rebar layouts in real time. The software is split into the following two modules:
Anchor Calculation
See some examples of the interface within the anchor calculation module.
Anchoring / threaded rods module
Anchoring / threaded rods module
Anchoring / threaded rods module
Anchoring / threaded rods module
See an example of detailed calculation outputs generated by the software in the anchoring / threaded rods module.
Rebar Connection
See some examples of the interface within the rebar connection module.
Easy selection of rebar configurations (e.g., slab-to-slab, slab-to-wall, column foundation, wall extension) in the post-installed rebar (PIR) module
See an example of detailed calculation outputs generated by the software in the post-installed rebar (PIR) module.