Product Data Sheet Show all documents

SikaControl® WT-200 P (IN)

Water Resisting and Crystalline Waterproofing Concrete Admixture

SikaControl® WT-200 P (IN) is a combined water resisting and crystalline water proofing admixture used to reduce permeability of concrete and has the ability to heal the cracks.

SikaControl® WT-200 P (IN) reduces ability of concrete to conduct water flow. It has unique active chemicals, which react with the moisture within the concrete and with various products of the cement hydration process. As a result of this reaction insoluble crystalline compounds are created throughout the entire capillary system. Over time crystalline formations reduce the size of the capillary pores until they are completely blocked and water flow is stopped. SikaControl® WT-200 P (IN) in water tight concrete application can result in:
  • Uniform water proofing throughout the entire concrete volume
  • No leakage due to surface damage
  • Reduced water penetration under pressure
  • Enhancement of self-healing properties of concrete
Product Data Sheet Show all documents

Usage

SikaControl® WT-200 P (IN) has been specifically formulated to produce high quality waterproof concrete.  SikaControl® WT-200 P (IN) can be used in any below/ in / above ground watertight structures such as:
  • Tunnels
  • Subway Stations
  • Bridges
  • Water tanks
  • Dams & Reservoirs
  • Water treatment plants
  • Basements
  • Foundations
 

Advantages

SikaControl® WT-200 P (IN) reduces ability of concrete to conduct water flow. It has unique active chemicals, which react with the moisture within the concrete and with various products of the cement hydration process. As a result of this reaction insoluble crystalline compounds are created throughout the entire capillary system. Over time crystalline formations reduce the size of the capillary pores until they are completely blocked and water flow is stopped. SikaControl® WT-200 P (IN) in water tight concrete application can result in:
  • Uniform water proofing throughout the entire concrete volume
  • No leakage due to surface damage
  • Reduced water penetration under pressure
  • Enhancement of self-healing properties of concrete

Packaging

20kg and 25kg bag

Colour

Off white to grey powder

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

ACI 212
Product Information

Chemical Base

Minerals and additives

Shelf Life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Storage Conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

Bulk Density

~ 0.8 g/cc at 25°C
System information

Compatibility

SikaControl® WT-200 P (IN) is compatible with most admixtures manufactured to IS & ASTM Specifications, most cements & pozzolans.

Application

Application Information

DISPENSING

Add the correct amount of SikaControl® WT-200 P (IN) during mixing process at the batch plant.
Consumption

Recommended Dosage

0.8% to 2% by weight of cementitious.

Actual dosage to be finalised on the basis of site trials and requirements.

Documents