Product Data Sheet Show all documents

Sikafloor® Colour Flake IN

Multi-coloured flakes for decorative flooring system

Sikafloor® Colour Flake IN are pigmented particles made from a film & shaped irregularly and the size is defined by a sieve specification. Sikafloor® Colour Flake IN are manufactured in solid colours. By mixing the colours, multicoloured decorative effects can be created.

  • Thin particles (film thickness 120 microns), small volume, large surface area
  • Light weight, low transport costs and less CO2 emission. 
  • Non-toxic and not hazardous for human health.
  • By mixing colours together, beautiful colour combinations can be made.
Product Data Sheet Show all documents

Usage

Sikafloor® Colour Flake IN are used to create decorative finishes in Epoxy, Polyurethane or Acrylic floors for office area, canteen, lobby, training room etc.  

Advantages

  • Thin particles (film thickness 120 microns), small volume, large surface area
  • Light weight, low transport costs and less CO2 emission. 
  • Non-toxic and not hazardous for human health.
  • By mixing colours together, beautiful colour combinations can be made.

Packaging

1 kg x 2 units

Colour

Multi colour flakes

Product Details

Product Information

Shelf life

60 months from date of production

Storage conditions

Store in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10°C and +30°C.

Maximum grain size

5.6 mm

Bulk density

2.0 - 2.5 g/cm3

Application

Consumption

Recommended Dosage

Application

Consumption

Self-smoothening decorative topping

0.025 - 0.050 kg/m2

Dosage of flakes will depend on type of finish requirement.
Application steps

APPLICATION

Sikafloor® Colour Flake IN are developed for application in Epoxy, Polyurethane or Acrylic floors. The flakes are sprinkled into a self-smoothening base layer (Colour/transparent), in full or open covering and after drying coated with a transparent PU topcoat.

Documents