SikaSeal®-106 Construction
SikaSeal®-106 Construction is an elastic, construction sealant for connection joints based on Sika’s innovative water-borne modified acrylic polymer technology. Its good adhesion to most construction materials makes it especially suitable for a variety of interior and exterior sealing applications.
- Very easy to apply, easy to clean
- Low stress on substrate
- Compatible with EPS/XPS
- Can be over-painted
- Phthalate free
- Water-borne
- Very low VOC emissions
- Good adhesion to porous construction materials
- Movement capability ±25 % (ISO 9047)
- Resistant to weathering
- Elastic
- 1-part ready to use
Usage
Sealing joints for: ▪ Connection joints ▪ Window and door frames ▪ Precast concrete elements ▪ Applications requiring over-painting of sealant ▪ Suitable for Exterior Insulation Finish Systems (EIFS). ▪ Interior and exterior useAdvantages
- Very easy to apply, easy to clean
- Low stress on substrate
- Compatible with EPS/XPS
- Can be over-painted
- Phthalate free
- Water-borne
- Very low VOC emissions
- Good adhesion to porous construction materials
- Movement capability ±25 % (ISO 9047)
- Resistant to weathering
- Elastic
- 1-part ready to use
Packaging
| 280 ml cartridge | 12 cartridges per box |
| 600 ml cylindrical pail pack | 20 foil packs per box |
Colour
Colour range to be defined by local sales organisation
Product Details
ENVIRONMENTAL INFORMATION
- VOC emission classification GEV-Emicode EC1PLUS
- Conformity with LEED v4 EQc 2: Low-Emitting Materials
- VOC emission classification of building materials RTS M1
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 15651-1 - Sealants for non-structural use in joints- Facade elements - F EXT-INT CC
- Joint classification, EN ISO 11600 F 12.5 E, SikaSeal®-106 Construction, SKZ, Report No. 123505/16-IV
- Joint Classification, ASTM C920-14 Type S, Grade NS, Class 25, Uses NT and M, SikaSeal®-106 Construction, MST, Report No-1216920-SIKA
Chemical Base
Modified acrylic dispersion
Shelf Life
24 months from the date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
Density
| ~1.50 kg/l | (ISO 1183-1) |
Product Declaration
EN 15651-1: F EXT-INT CC,
EN ISO 11600: F 12.5 E
ASTM C920: Type S, Grade NS, Class 25, Uses NT and M
Shore A Hardness
| ~15 (after 28 days) | (ISO 868) |
Secant Tensile Modulus
| ~0.10 N/mm2 at 60 % elongation (23 °C) ~0.40 N/mm2 at 60 % elongation (−20 °C) | (ISO 8339) |
Tear Propagation Resistance
| ~2.0 N/mm | (ISO 34) |
Movement Capability
| ±25 % ±25 % | (ISO 9047) (ASTM C 719) |
Service Temperature
-40 °C min. / +70 °C max.
Joint Design
The joint dimensions must be designed to suit the movement capability of the sealant. The joint width must be ≥ 5 mm and ≤ 15 mm. The joint depth must be ≥ 5 mm and ≤ 10 mm. A width to depth ratio between 2:1 to 1:1 must be maintained (min / max examples, see table below).
| Joint width [mm] | Joint width [mm] |
| min. 5 | min. 5 |
| max. 15 | max. 10 |
All joints must be correctly designed and dimensioned in accordance with the relevant standards and codes of practice before their construction. The basis for calculation of the necessary joint widths are the type of structure, dimensions, technical values of the adjacent building materials, joint sealing material, and the specific exposure of the building and the joints.
For larger joints contact Sika Technical Services for additional information.
Application
Backing Material
Use closed or open cell, polyethylene foam backing rod
Sag Flow
| ~0 mm (20 mm profile, +50 °C) | (ISO 7390) |
Ambient Air Temperature
+5 °C min./+40 °C max.
Substrate Temperature
+5 °C min./+40 °C max. Minimum +3 °C above dew point temperature
Curing Rate
| ~2 mm (+23 °C / 50 % r.h.) | Sika Corporate Quality Procedure (CQP 049-2) |
Skin Time
| ~30 minutes (23 °C / 50 % r.h.) | (CQP 019-1) |
Tooling Time
| ~20 minutes (23 °C / 50 % r.h.) | (CQP 019-2) |
SUBSTRATE PREPARATION
The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the sealant. The substrate must be of sufficient strength to resist the stresses induced by the sealant during movement.
SikaSeal®-106 Construction adheres without primers and/or activators.
Concrete, aerated concrete and cement based renders, mortars and bricks surfaces can be primed if required using SikaSeal®-106 Construction dissolved in water (ratio 1:1–1:5) and applied by brush.
Iron and steel
Must be protected with an anti-corrosion primer. Contact Sika Technical Services for additional information.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically. For cleaning skin, use Sika® Cleaning Wipes-100