Product Data Sheet Show all documents

Sika® FloorJoint EX A

“Phoenix” Panel prefabricated polymer composite for wide gap eccentric floor joint

Sika® FloorJoint EX A is a prefabricated, glass-carbon fiber reinforced, extremely resistant, flat and hardly recognizable polymer composite panel with high physical properties. Because of the waved and eccentric joint design an improved load distribution and water proof performance is achieved.

  • Multiple sandable
  • Suitable for heaviest loads
  • Rapid implementation for driving on after 24 hours
  • No unevenness, ultra-flat
  • No vibration while driving
  • Allows horizontal movements
  • Expansion coefficient similar to resin floors
  • Tight coating possible
  • Low installation height
  • Simple installation
  • High chemical resistance
  • Suitable for food products
  • Temperature and weather resistance
  • Partial quick repair possible
  • Metal-free, therefore non-corrosive
Product Data Sheet Show all documents

Usage

  • Floor joint panel for new build and refurbishment of joints for concrete screeds with normal up to medium heavy wear e.g. for storage and assembly halls, maintenance workshops, hospitals, schools and ware houses.
  • Particularly used in the food and pharmaceutical industries, for show rooms, workshops and production areas etc.
 

Advantages

  • Multiple sandable
  • Suitable for heaviest loads
  • Rapid implementation for driving on after 24 hours
  • No unevenness, ultra-flat
  • No vibration while driving
  • Allows horizontal movements
  • Expansion coefficient similar to resin floors
  • Tight coating possible
  • Low installation height
  • Simple installation
  • High chemical resistance
  • Suitable for food products
  • Temperature and weather resistance
  • Partial quick repair possible
  • Metal-free, therefore non-corrosive

Packaging

111 pieces on an EU-pallet

weight, approx. ~8.35kg/PCS

Colour

Grey, approx. RAL 7037

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Reaction to fire classification acc. to DIN EN 13301-1.
  • Test report No.: KB-Hoch-140803.
  • The fire behaviour of the polymeric material of Sika® FloorJoint EX A is classified as: Bfl-s1.
Product Information

Chemical base

PUR

Shelf life

3 years

Storage conditions

In cool and dry conditions at temperatures between +5 °C and +30 °C, always in horizontal and flat position.

Dimensions

Length × width × height = approx. 1200 mm × 255 mm × 15 mm

 
Technical Information

Compressive strength

~110 N/mm2 (14 days, 23 °C / 50 % R.H)

(DIN EN 196-1)

Tensile strength

~50 N/mm2 (14 days, 23 °C / 50 % R.H)

(DIN EN 196-1)

Application

Application Information

Ambient air temperature

+10 °C min. / +30 °C max.

Relative air humidity

80 % max.

Dew point

Beware of condensation!

The substrate and uncured floor must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.

Substrate temperature

+10 °C min. / +30 °C max.

The substrate and uncured floor must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.

Substrate moisture content

< 4 % pbw moisture content.

Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.

No rising moisture according to ASTM (Polyethylene-sheet).
Consumption

Consumption

1 piece for 1.2 linear meter
Application steps

APPLICATION

Please refer to the product data sheet of Sikadur®-31 IN and/or the Method Statement “Sika® FloorJoint EX A”.

CLEANING OF TOOLS

Please refer to the product data sheet of Sikadur®-31 IN.

Documents