Product Data Sheet Show all documents

Sika® FloorJoint XS

Carbon fibre prefabricated floor joint panel

Sika® FloorJoint XS is a carbon fibre reinforced polymer (CFRP) composite, prefabricated, floor joint panel with high mechanical resistance for normal up to medium wear loading conditions. Its sinusoidal surface tooth profile allows for an improved load distribution and results in minimum vibrations under direct car and forklift traffic. Gap widths: 0–5 mm. Sika® FloorJoint XS is a small version of Sika® FloorJoint S and is the main part of the Sika® FloorJoint PB-30 XS System.

  • Grindable profile for level integration into the floor surface
  • Reduced vibrations under direct car and fork lift traffic
  • Thermal expansion coefficient similar to resin based floors
  • Easy to install / Easy to repair
  • Short down time - Trafficable after 24 hours
  • Waterproof system design possible
  • High chemical resistance
  • Non corroding
  • High mechanical resistance
Product Data Sheet Show all documents

Usage

  • Floor joint panel for new build and refurbished joints in concrete / concrete screeds in:
  • Storage areas, assembly halls, maintenance workshops, hospitals, schools, warehouses, show rooms, pharmaceutical industry, production etc.
 

Advantages

  • Grindable profile for level integration into the floor surface
  • Reduced vibrations under direct car and fork lift traffic
  • Thermal expansion coefficient similar to resin based floors
  • Easy to install / Easy to repair
  • Short down time - Trafficable after 24 hours
  • Waterproof system design possible
  • High chemical resistance
  • Non corroding
  • High mechanical resistance

Packaging

270 pieces on an EU-pallet. Weight: approx. 2,8 kg/piece.

Refer to current price list for packaging variations.

Colour

~RAL 7037

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Fire Testing DIN EN 13501-1, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140803-3
  • Fire Testing DIN EN ISO 11925-2, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140801-3
  • Fire Testing DIN EN ISO 9239-1, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140802-3
Product Information

Chemical Base

Carbon fibre reinforced polymer

Shelf Life

3 years from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C and must always be stored in the horizontal position in order to avoid bending. Always refer to packaging.

Dimensions

Length

1200 mm

Width

80 mm

Height

15 mm
Technical Information

Compressive Strength

~60 N/mm² (after 14 days at 23 °C / 50 % r.h)(DIN EN 196-1)

Tensile Strength

~50 N/mm² (after 14 days at 23 °C / 50 % r.h)(DIN EN 196-1)

Reaction to Fire

Bfl s1 (composite material of panel)

(EN 13301-1)

Chemical Resistance

Resistant to many chemicals. Contact Sika Technical Services for specific information.

Joint Design

Gap width1

Positive joint movement2

Negative joint movement3

1 mm

+3,0 mm

-1 mm

2 mm

+3,0 mm

-2 mm

3 mm

+3,0 mm

-2 mm

4 mm

+2,0 mm

-2 mm

5 mm

+1,0 mm

-2 mm

  1. Width of the gap in the concrete below Sika® floor Joint panel during installation.
  2. Positive joint movement is the amount the gap can open, compared to its original width during installation of Sika® floor Joint panel. Do not exceed the maximum positive joint movement capacity, otherwise the teeth of the Sika® floor Joint panel become unsupported and may be damaged.
  3. Negative joint movement is the amount the gap can close, compared to its original width during installation of the Sika® floor Joint panel.

Application

Consumption

Consumption

1 piece per 1,2 linear metre of joint
Application steps

APPLICATION INSTRUCTIONS

APPLICATION

Reference must be made to further documentation where applicable, such as relevant method statement, application manual and installation or working instructions. Refer to the Sika Method Statement: Sika® FloorJoint XS.

Documents